Zaxcom QRX212, Руководство пользователя

Страница: 12 / 22

Zaxcom RX12 System Menu
12
Frequency List / Auto-Pick
This page displays the current chosen frequency of each receiver module. If a module is set to dual mode both
frequencies will be displayed. From this page frequencies can be selected so Auto-Pick can change the
frequency of any receiver(s).
How to use Auto-Pick
1.
Select a receiver by rotating the menu encoder knob.
2.
Press the encoder knob to select the receiver. That will put a
green check mark to the right of the frequency that will be
changed.
3.
After all the desired receivers are selected, press the star key to
let the RX12 choose a frequency with the cleanest scan for each
receiver.
4.
Press the # Key to uncheck the receiver(s).
Encryption
This is where the encryption code of the RX12 is set. If the TRX transmitter that is sending audio has
encryption turned on the RX12 can only listened to it if it has the same matching encryption code entered.
When the codes do not match, all that will be heard is white-noise.
Each individual QRX212 module will share the same encryption code therefore if encryption is turned on all
TRX transmitters will need to have encryption enabled as well.
The encryption code should always be set to 000000 for normal un-encrypted operation.