Zavio V1100, Руководство пользователя

Страница: 21 / 26

V1100 User Manual
19
SD Card
Make sure to insert the SD Card first then click “on”. Create a folder name for event server in SD
Card. Optional selection for overwrite the previous file or not, if not, you may set a warning when
the capacity below the following percentage:5%, 10%, 25% and 50%.
Event List
Event List
General
Name the event file and make it on or off.
Trigger
You may activate the following trigger types as you wish depends on various conditions:

Motion Detection : Click it on for using Motion Detection function as a sensor. You must
configure motion detection function before taking this as the trigger. Set minimum time interval
between 2 triggers, and choose the desired detection area. The detection type individually stands
for the following meanings:
Start : The trigger would be activated when the target object starts to move.
Stop : The trigger would be activated when the target object stops to move.
Start-Stop : The trigger would be activated during the target object starts to move till it stops.

Audio Detection : Click it on for using Audio Detection function as a sensor. You must configure
audio detection function before taking this as the trigger. Set minimum time interval between 2
triggers. The detection type stands for the following meanings individually:
Start : The trigger would be activated when the sound being made.
Stop : The trigger would be activated when the sound being cut off.
Start-Stop : The trigger would be activated during the sound being made and cut off.

Digital Input: This can be set to control the external alarm input of I/O port on the rear of the
device to start the trigger.

Periodical : This can be set the certain period (by minute) to start the trigger.

On boot : The event is triggered when the device has been started over.

Capacity Warning : This is triggered when SD Card capacity is be below the value you set.

Network Link Down : The event is triggered when the network gets disconnected.

IP Notification : The event is triggered when the network being restarted or the IP being
changed. And there are optional network types to select, such as DHCP
、
Static IP and PPPoE.