Zavio F531E, Быстрое руководство по установке

Страница: 3 / 12

Install the hardware
1. F531E
a. Sun Shield Assembling
Assemble sun shield with (2) screws and (2) plastic washers.
b. Wall mounting and Ceiling mounting
1. Use the 3 supplied screws to fix the bracket to a flat surface.
2. Loosen the lock ring to adjust the desired angle of the camera.
3. Tighten the lock ring.
2. F731E
a. Sun Shield Assembling
b. Wall mounting
Note:
Fix the cover to the camera with two supplied screws.
(Type 1 screws)
2. Fix the camera and bracket to the wall using two screw
and plastic anchors.
(Type 3 screws)
1. Fix the camera to the bracket with four supplied screws.
(Type 2 screws)
1. If not necessary, please don’t open the housing to avoid moisture invading inside.
2. In case of needing to open the housing, please restore in 5 minutes.
3. If fog appears on the lens, please open the cover of IP CAM and expose it in the dry environment between 50~70
℃
around 2 hours to dry the wetted inside.
4. Please don’t loosen the cable gland to avoid water leaking.
3