F5100 / F5105 / F5110 / F5115 User Manual
9.4.2 Alarm Sending
Set to send the command with connection to the alarm detection by the external sensor input
or by the built-in motion detection function. Select “
On“
to send the command to HTTP
server linked with the alarm detection.
Alarm sending
: Select
On
to set to send command with connection to the alarm detection.
Alarm
Motion Detection
:
Click it on for using
Motion Detection
function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection
screen
. (Please go “Setting
→
Advanced
→
Motion detection
→
Setting”) For more details, you can check Chapter 9.9.
66
Parameter:
the parameter of CGI (defined in URL of HTTP
→
General) is
from your target device. For example, move=down.
Message:
message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
Setting-Advanced
HTTP Event
Содержание F5100
Страница 1: ...F5100 F5105 F5110 F5115 User Manual ii ...
