Zavio D8520, Быстрое руководство по установке

Страница: 6 / 16

5
B. Wall mounting and Ceiling mounting
a) Attached the alignment sticker to the wall. Drill five holes into the wall. Then hammer
the supplied plastic anchors into the screw holes and secure the mounting plate.
b) Attach the camera to the mounting plate and turn the camera clockwise until the clips
snap to the mounting plate.
c)
Put the O-rings on the two supplied screws and fix the camera to the mounting plate
from inside with them to prevent unauthorized removal.
C. Connect all cables
C1. Without Power over Ethernet (PoE) connection
1. Connect the power adaptor to the IP Camera.
2. Use a standard RJ-45 network cable and connect the IP Camera to a
hub/switch/router.
C2. Power over Ethernet (PoE)
1. Use a standard RJ-45 network cable and connect the IP Camera to a PoE-enabled
hub/switch/router.