3
Install the hardware and connect all cables
a. Wall mounting and Ceiling mounting
1. Unfasten the cover of the Dome IP Camera
2. Use the 2 supplied screws to fix the base of the
IP Camera to a flat surface. (vertical or horizontal)
3. Unscrew the pan screw; adjust the mini-case to
your desired pan angle and then screw tight the pan screw.
4. Unscrew the tilt screws; adjust the mini-case to
your desired tilt angle and then screw tight the tilt screw.
5
.
Fasten the cover.
b. Connect all cables
b1. Power over Ethernet (PoE)
1. Using a standard RJ-45 network cable, connect the IP Camera
to a PoE-enabled Hub / Switch / Router
b2. Without Power over Ethernet (PoE) connection
1. Connect the power adaptor to the IP Camera.
2. Using a standard RJ-45 network cable, connect the IP Camera
to a normal Hub / Switch / Router.
b2
b1
