23
Tampering Detection
Select “on” if you want to activate the tempering detection.
Trigger Duration:
This setting is set for the trigger will be started for the duration of tampering lasts you
configure. The duration range is from 5 seconds to 900 seconds.
Schedule
The schedule is made for
Event List
to set the recording period. There are already 3 modes(
Working Day
、
Weekend
and
Night Mode
) has been set for user, there are 7 more modes are available to set manually.
System
Maintenance
Restart
Restart button is for reboot the IP Camera digitally, you may reboot the camera manually or automatically.
Click “on” and shows two modes for user to reboot the camera automatically.
Sequential Mode
offers the
selection that how many days you would like to reboot, 7 days at most.
Schedule Mode
is able to select the
certain day and time to reboot.
Backup/Restore
Default
: Click this button to recover this IP Camera to the factory default setting. A confirmation dialogue
will appear and then click “OK” to execute. The network indicator on this IP Camera will start to blink. This
IP Camera will reboot automatically after completing adjustments to the default setting. Don't turn off this IP
Camera until the device reboots. Furthermore, the
IP
and
Date Time
that are already set up can be fixed.
Backup
: You can save the setting data of this IP Camera into a file. Click “Save” and follow the instructions
on the browser to save the setting data file to the location you specified.
Restore
: Download the saved setting data of this IP Camera. Click “Browse” and select saved file. Click
“OK” and this IP Camera is adjusted according to the loaded data and then restarted.
Firmware Upgrade
Update the device software. Click “Browse” and select the file for updating. A confirmation dialogue will
appear. Click “OK” to start. This IP Camera will reboot upon completion.
Date Time
Please refer to p.14~15
Содержание D3100
Страница 1: ......
Страница 7: ...6 Main Page Toolbar of Main Page...
