Zavio D3100, Руководство пользователя

Страница: 13 / 28

12
Use the following DNS server address : Select this when you set the fixed address as the IP address of
DNS server.

Primary DNS server: Enter the IP address of the primary DNS server.

Secondary DNS server: Enter the IP address of the secondary DNS server.
Note : 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating
Point-to-Point Protocol frames insider Ethernet frames. PPPoE connection is used mainly with ADSL
service where individual users connect to the ADSL transceiver (modem) over Ethernet work. It also
widely used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL)
2. Reboot the IP Camera after the network setting has been made .
3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the PPPoE and reboot.
Date Time
Current Date / Time
It displays current time and date of IP Camera and PC that you connected, and you may select the Date/Time
format as you wish in the drop-down menu.
Note: If you would like the Date / Time information shows on the Live View screen, please check “Basic Setup
→Video →Overlay → Overlay Type → Time Stamp ” and save the setting.
Synchronization Method

Keep current setting: Select this mode to keep the current date and time of this IP Camera.

Synchronize with Client PC: Select this mode to keep the date and time of this IP Camera is the
same as the monitoring PC.

Manual setting: Select this mode to adjust manually the date and time of this IP Camera.

Synchronize with NTP: Specify the NTP server name and click “Update now” to synchronize the
date and time of this IP Camera with those of the time server, known as the NTP server.
Time Zone
Time Zone : Select the Time Zone format of Greenwich Mean Time among different
cities. The time display will be the same as the current date / time option.
Daylight Saving Time : There are two modes to choose for setting up daylight saving time.

By Date : Set the start and end time by select month, day, hour, and minute.

By Week Number : Set the start and end time by select month, week, hour, and minute.