Install the hardware and connect all cables
a. Wall mounting and Ceiling mounting
1. Use the 3 supplied screws to fix the base plate to a flat surface.
2. Loosen the lock ring to adjust the desired angle of the camera.
3. Tighten the lock ring.
b. Connect the camera to the network and to the power supply
1. Use a standard RJ-45 network cable to connect the IP Camera to the Network connection
2. Connect power adaptor to the IP Camera.
Microsoft OS:Use the software CD to install Intelligent IP Installer
Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow these steps to
install the firmware.
Access the IP Camera using Intelligent IP Installer
1. Before using Intelligent IP Installer, please check two settings.
Select
“Intelligent IP Installer” and follow the installation process to complete the installation.
a. Browser’s Internet Properties
→
Security
→
Default Level
b. Browser’s Internet Properties
→
Privacy
→
Uncheck
Pop-up Blocker
2
