Zauber MAX-210, Руководство пользователя

Страница: 12 / 34

Zauber MAX-210 © ZAU Grupp 2012 (ENG) Page 12 of 36
Memento: When components are used, they must
be cleaned only in the vertical position; under no
circumstances the components shall be cleaned in
horizontal position.
• Before using the components, read attentively the
manual; moreover, we recommend a test run with an
obsolete fabric.
Brush
Set the spray cap with a brush. Hold the tip of the cap
with a brush by hand, combine arrow on the cap with
a single spray line marking on short nozzle body of the
instrument and fix the position of spray cap. Scrolling
through the cap, align the arrow cap with a double line
markings on a short nozzle. Figure 1. Attach the spray
cap on the appliance. For his removal from a round
brush, roll-intensive counter-clockwise, as shown in
Fig. 2, and align the arrow on the cap with a spray
pointing to the line of the unit. Later, spray cap with a
round brush can be removed.
Spray Nozzles
The tire helps to easily iron the edging and shrink cloth.
Mount the tire on brushes and fix it in the right position.
Hold the brush tightly and open the tire.
Put cloth between tire and brush.
Tightly close the handle around the cloth and iron from
top downward. Before dismounting the brush again,
switch the device off. If no steam is coming from the
brush, it may be removed. Never touch the elements
made of stainless steel, it may lead to burns. Set the
spray cap with a round brush or with a curved spray
nozzle. For direct mounting on a short spray nozzle
wear the cap with a round brush or curved nozzle on
top of the spray nozzle, as shown in Figure 3, the cap
and push forward to lock its position. As short spray
nozzle and cap are placed in six directions, the angle
and direction can be adjusted during the the installation.
Or, first set a long nozzle and then to the nozzle Spray
with a round brush or a curved tip. The long nozzle
installed in the same manner as the spray nozzle with
a brush. Spray nozzle with round brush or a curved tip
and an elongated spray nozzle can be installed using
the same procedure as for procedure for short nozzles
Install spray cap for doors / windows
4