Zauber ECO-250, Руководство пользователя

Страница: 14 / 44

Zauber ECO-250 © ZAU Grupp 2012 (ENG) Page 14 of 44
Control panel:
1. Power indicator
2. Low steam rate indicator
3. Steam rate control button
4. Power switch
5. Steam rate control button
6. High steam rate indicator
7. Lack of water indicator
8. Descaling indicator
9. Medium steam rate indicator
Temperature dial:
1. The first setting (For synthetic fibers/silk) 70<T<120 °C
2. The second setting (For wool) 100<T<160°C
3. The third setting (For cotton) 140<T<210°C
4. Maximum setting (For lien) 170<T<225°C
Bottom of steam generator:
1. Drain water cap
2. Screwer
Trigger
Grasp the water tank’s handle with the hand and press
the trigger with one finger, then you can take out of the
water tank for filling water.
Filling cap
The filling cap is attached in the water tank, if less water
in the tank, you shall open the cap and fill water. After
filling water, close it.
Power switch
Plug in the appliance and press down the Power switch,
the power indicator will be illuminated, also the low steam
rate regarded as defaulted one and its indicator will flash.
Press down the Power switch for a while, both the power
indicator and low rate steam indicator will be extinguished,
and the appliance will be disconnected from the power
supply.
Steam rate control buttons
The steam rate can be selected low, medium or high with
the two steam rate control buttons (see the schematic