Zator DLK22LT-LC, Руководство пользователя и по обслуживанию

Страница: 13 / 40

SECTION 2 - SAFETY RULES AND REGULATIONS
13
Zator Via Galvani, 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it
Before the start-up of the electromagnetic valve the personnel must be adequately informed and trained
on its use, direction and start-up process, as well as the safety norms to be performed and also observe
how it is prescribed in this document and in other documents possibly attached to the electromagnetic
valve.
The employer must provide to instruct the personnel on the risks of injury, on safety devices and accident
prevention general rules provided by the community directives and the legislation of the country where
the electromagnetic valve is installed.
For personnel who will work on the electromagnetic valve, for any functions (installation, assembly,
demolition, maintenance and operation) they will be provided with appropriate P.P.E. - Personal protective
equipment of type approved and certificate by C.E.:
• anti-solvent gloves
• cut resistant gloves
• masks
• coverall (no floating coverall)
CAUTION: Always disconnect the power supply before proceed to carry out any maintenance
or adjustment operations.
Discharge the fluid pressure before to proceed to carry out any maintenance or adjustment
operations.
CAUTION: The clothes of who will operate the electromagnetic valve for any functions must be
in compliance with the essential safety requirements defined by the regulation 2016/425/UE of
9th of May 2016 and by the actual laws in the country of use.
2.1 Safety and environment general informations
2.2 P.P.E. Personal protective equipment