ZMCE 1.1AD
6
Like entering digital channel measurement
mode, the same way you can enter analog
channel, or press to toggle to analog
channel from digital channel.
F1 Enter V/A measurement menu
F4 Enter “Next screen
V/A measurement
In analog channel measurement mode,
Press F1 to enter V/A measurement menu.
The screen will show the video carrier signal
level, audio carrier signal level, and the
video to audio ration.
Audio measurement
On “Next screen” of analog channel
measurement mode, press F3 to enter audio
measurement.
Using F1 adjust the volume, using F2, F3
turn up, turn down the channel. Press F4 to
go back to the video carrier measurement
mode.
Single Frequency Measurement
In analog channel measurement mode, using numeric key input the frequency
number, next you will see 4 soft keys on the bottom of the screen, then use F1 as
backspace, use F2 to insert a dot, press F3 to enter single frequency measurement.
Using F1 or F2 tune up or tune down the frequency at 50Hz step, using F3 adjust, the
volume. Press F4 to go to next screen.
