ZMCE 1.1AD
5
START TO USE
Digital channel signal measurement In the main menu, select the
LEVEL
icon and press to enter channel measurement mode. The
same way you can select other icons or directly press other numbers
to enter other measurement modes.
In digital channel measurement mode, there is “CHD”symbol before
the channel number. The screen will show frequency and average
channel power.
If the channel is analog it will show “CHV” before the channel
number, press to shift to digital channel.
F1: Enter QAM analysis menu.
F4: Enter next screen of this measurement
mode In any modes, you can press to go
back to main menu.
In digital channel measurement mode,
press F4, enter below menu.
F1: The previous menu.
F2: Setup parameters of current channel.
F3: Enter single frequency measurement
mode.
F4: Enter “Next screen”. MER, BER Analysis
In digital channel measurement mode,
press F1 to enter QAM analysis mode.
F1 Refresh
F3 Setup of channel parameters
Analog channel measurement mode
