Zastone ZT-V9, Руководство пользователя

Страница: 26 / 40

★
（
SE
）
Searching Opeartion
Radios stop in the frequency which has checked out signal and then quit scanning .
Setting steps as following:
1) Press [MENU], [MENU] would display on the screen ,next line is blank .Then Press [UP]or
[DOWN] to select“SCAN M”.
2)
Press [MENU] enter into setting ,first line is “SCAN”,next line shows the status.
3) Press [UP]or[DOWN] to select TO/CO/SE.
4) Press [MENU] to confirm storing the settings and return ,or press [*/BAND] to exit and back to
standby ,but it can not store the settings.
3.10 VOX
Do not need to press PTT to control VOX .Just transmit by voice ,if voice stop ,transmit would
stop automatically ,and waiting for receiving .
1) Press [MENU], [MENU] would display on the screen ,next line is blank .Then Press [UP]or
[DOWN] to select“VOX”.
2)
Press [MENU] enter into setting ,first line is “VOX”,next line shows the status.
3) Press [UP]or[DOWN] to select OFF/1/2/3/4/5.
4) Press [MENU] to confirm storing the settings and return ,or press [*/BAND] to exit and back to
standby ,but it can not store the settings.
The Voice threshold for VOX can be set by this function .The transmit function is turned on when
voice is higher than Voice threshold.
Menu Contents
25