Zastone ZT-V9, Руководство пользователя

Страница: 24 / 40

It requests narrow channel spacing in Channel-intensive areas.Therefore it needs to reduce
bandwidth when transmitting so as to avoid some interruption between adjacent channels. Select
Wide/Narrow as following steps:
1) Press [MENU], [MENU] would display on the screen ,next line is blank .Then Press [UP]or
[DOWN] to select“WN”.
2)
Press [MENU] enter into setting ,first line is “WN”,next line shows the status.
3) Press [UP]or[DOWN] to select WIDE/ NARROW.
4) Press [MENU] to confirm storing the settings and return ,or press [*/BAND] to exit and back to
standby ,but it can not store the settings.
Note:
Choose Narrow as 12.5KHz,Choose Wide as 25KHz.It would display the icon “W”in the bottom
left corner of LCD or “N” in the bottom right corner.
3.7 OFF SET
Offset means the difference between the frequency that user receiving(ascending Frep). Set the
Offset value mainly according to the using offset of the repeater.
1) Press [MENU], [MENU] would display on the screen ,next line is blank .Then Press [UP]or
[DOWN] to select “OFF SET”.
2)
Press [MENU] enter into setting ,first line is “OFF SET”, next line shows off set value .
3) Press [UP]or [DOWN] to select offset from 0.0MHz~69.9MHz . If user need to adjust
quickly ,also change it by keypad.
Menu Contents
23