33
SCAN
Press
【
Scan
】（
programmable
），
then scanning with displayed icon .Press Up/Down to choose scanning
setting ,press other keys to quit scanning .
Only allowed scanning channel can be scanned .It is waving scanning and once stop the channel ,that means
get signals .After signal goes off ,transceiver will stop this channel for certain time ( time can be set by
program) ,once get signal again within specified time ,then it will keep scanning . If not still stop at this channel .
Note : There should be more than 2 channels can active scanning function in the list .
1
）
Temporary Channel Lockout.
Press
【
*
】
the temporary deleting Noisy Channel key to keep on scanning next channel when stop scanning ,And it
will not scan the deleted channel later . But if transceiver quit to scan and active scanning function again ,the
deleted channel still can be scanned .
2
）
Priority Scan
With the cycling scanning ,please allow turn on the priority scan function when set the
priority channel .Every channel scanning should scan the priority channel first . See pic
showing : CH2 as the priority channel .
