Button Definition:
Button 1 is used to call House Name 1 , Handsets with 001 code
Button 2 is used to call House Name 2 , Handsets with 002 code
Dip switches
:
Dip switch 1 & 2 are used to set the
ID code
. ID code is used to avoid interference from other systems
and to provide security with gate opening. There are 4 different ID codes to select
Setting of ID code:
Dip switch set in UP position = 1 DOWN position = 0
Dip switch no.1
Dip switch no. 2
ID code 1
1
1
ID code 2
1
0
ID code 3
0
1
ID code 4
0
0
Dip switch 3 & 4 are used to set the operating channel. The operating channel is the frequency setting
and is used to avoid interference from other systems and to provide security with gate opening. Note that
the operating channel must be the same as that of the handset. There are 4 operating channels
Setting of operating channel:
Dip switch set in UP position = 1 DOWN position = 0
Dip switch no.3
Dip switch no.4
CH1
1
1
CH2
1
0
CH3
0
1
CH4
0
0
Pairing procedures
Each unique code/ house number needs to be programmed separately. If there are 2 or more handsets per
button, they must be paired together at the same time from the gatestation.
Pairing procedure
1)
Handset into pairing mode
2)
Gate station into pairing mode
3)
Press pairing button on gatestation
4)
Check code on handset
5)
Reset handset battery and gatestation power and test communication