Back gatestation
It is possible to add an additional gatestation to be used on another entrance or exit, for instance to be
notified when visitors want to exit. The functions of the back gatestation are similar to the front station
as all the same names and codes are stored on the station. Gate triggering is limited in that a call has to
be initiated from the back gatestation in order to be able to trigger the gate it is connected to.
Programming a gatestation:
Once the front gate has been programmed and all the handsets paired the front gate will be able to clone
a backgate station. Note that if any changes are made to the front gate programming such as new names,
numbers or additional handsets, the back gate will need to be updated again via PC cloning.
Enter PC programming mode on both the front and back gate
Connect the front gate to the PC using the cable and READ from gatestation (left icon).
The PC will load all the programming on the screen
Now connect the back gate station and WRITE to station (right icon)
The station is ready to use.
System busy function (if required)
This function is used to block any communication from either front or back gatestation whilst another
conversation is in progress. A hard wire connection is required between the 2 gatestations. There is a 3
core wire coming from the back of each gate station, the colour of wires are red, white and black. Connect
red to red, black to black and white to white.
If you do not connect these wires, the gate station will still perform normally but will not have the system
busy function.
When either the front or back station is making call, the remaining station cannot make any calls until the
station in use finishes the call. The screen of remaining station will show:
“SYSTEM IN USE PLEASE WAIT”
Above text will be shown until the station in use finishes the call. In case a visitor tries to make a call when
this text is shown on screen, the station will just ignore the input and provide no response.
When two visitors approach the front and gate station at same time and try to make a call, the visitor who
first press the CALL button can initiate the call, the remaining station cannot make a call and screen will
show “ SYSTEM IN USE PLEASE WAIT”
Содержание CDP-808
Страница 12: ......