10
Inspection steps for components
The centrifugal force weight (4) is not turning:
X
Stop lift movement immediately.
X
Press the EMERGENCY STOP button (2) immediately.
à
The hand lever (1) jumps from position A to
position B.
à
The gripper (6) closes, and lift movement stops.
X
Disconnect the power supply to the winch (7) via the
main switch.
X
Decommission the service lift immediately.
X
Attach a corresponding sign at the main switch of the
service lift.
X
Inform the operator and manufacturer of the service lift.
X
Have the gripper (6) inspected and repaired by
authorised and qualified specialist personnel.
X
Stop lift movement.
à
The brake grips and holds the service lift on the sus-
pension cable.
X
Move the service lift downward.
X
Stop lift movement.
à
The brake grips and holds the service lift on the sus-
pension cable.
The brake does not grip and does not hold the service lift
on the suspension cable:
X
Press the EMERGENCY STOP button (2) immediately.
à
The hand lever (1) jumps from position A to position
B.
à
The gripper (6) closes, and lift movement stops.
X
Disconnect the power supply to the winch (7) via the
main switch.
X
Decommission the service lift immediately.
X
Attach a corresponding sign at the main switch of the
service lift.
X
Inform the operator and manufacturer of the service lift.
X
Have the winch (7) inspected and repaired by authorised
and qualified specialist personnel.
The inspections and results must be documented in the inspection record immediately after the inspection.
X
Tick the "Drive," "Motor brake" and "Centrifugal force weight" fields after the inspection has been carried out.
X
If the inspection failed, tick the "Out of service" field.
X
If all inspections have been completed successfully, tick the "Ready for operation" field.
X
Enter any special items of note in the "Notes" field.
A
B
2.
1.
A
B
