©2014-2018 ZappBug. All rights reserved. Product specifications subject to change.
10
To learn more, please visit us at
ZappBug.com
11
3. Select Appropriate Support Configuration
The ZappBug Oven 2’s unique and modular support system is designed to
accommodate a wide range of items. Support blocks allow for
ventilation
around
rigid, heavy items such as luggage and small furniture. A combination
of
Support Blocks
and the
Support Net
allow for ventilation around loose items
such as books and clothing. Select the appropriate support configuration for
your items as shown below. It is critical that air is allowed to flow freely around
the items you are heat treating.
Support Net
Support Blocks
Attach all Toggles of
Support
Net
in the Oven 2
TM
4. Locate Two Independent Power Outlets
NOTE: Each heating unit must be powered from it’s own circuit. Typical residential
and commercial buildings have one circuit per room. Use the included extension
cord to reach outlets in other rooms (where necessary).
One power extension cord is included in each ZappBug Oven 2. Plug one
heating unit directly into a nearby electrical outlet.
Locate an electrical outlet in another room or area that operates on a separate
electrical circuit. Typically, each room will have it’s own independent electrical
circuit. Use the included power extension cord to connect the remaining heating
unit to this separate electrical outlet.
Use & Operation
(continued)
Use & Operation
(continued)
5. Insert Items For Heat Treatment
Place items inside the Oven 2
TM
on top of Support Blocks/Support Net. To
ensure
adequate airflow
, items should not touch walls or ceiling of the Oven 2
TM
. Place
wireless thermometer probe inside deepest (most insulated) location in items
being treated. After that, zip the top cover closed.
Hint:
Always open luggage and
“fluff” items
to ensure air circulation. If items are
densely packed, they take longer to heat.
6. Wireless Thermometer Setup
The ZappBug Oven 2
TM
comes with an included thermometer base station and a
remote probe, pictured below.
Thermometer Base Station
Thermometer Probes
Note:
Setup Thermometer
Base station first
