Zapi SMART CONSOLE, Руководство пользователя

Страница: 10 / 50

Page - 10/50 AFGZP0BA – SMART CONSOLE - User Manual
Smart Console has no isolated CAN transceiver but it is possible to connect to
this type of line in two ways:

Use internal batteries. In this case connect NCAN to the ground of the
console:
don’t connect any other ground signal from the application!
CAN communication will run normally

Connect the console ground to NCAN and the positive supply pin CNX8 to
PCAN. If PCAN is within limits of CNX8 supply voltage and if it can deliver
enough supply current (see section 2.2.1), the console will turn on and it will
operate normally.
CAN speed
The Smart Console supports CAN speed up to 500kbps. Larger speeds are not
supported.
If a Smart Console is connected to a CANBUS running at large speed, every
communication attempt will return an error message.
2.4.2 Serial communication
The Smart Console retains the same serial communication as the Console Ultra.
Because the Console Ultra has been on the market for many years, it is
supported by a wide range of products ranging from the very old chopper series
to the latest “E” family AC controllers.
The Smart Console has been developed to cover the same range of products so
it is expected to be compatible with all controllers which can connect the old
console.
Following list contains all product which have been tested successfully with the
Smart Console serial interface:
 AC2 FLASH
 AC3 FLASH (standard and 2µc version)
 ACE2 (standard and 2µc version)
 ACE5 (standard and 2µc version)
 ACX
 AC0
 AC1
 COMBIAC1

DUALAC2
 EPS-AC0
 SEM0
 H0
 H2
Moreover the Smart Console is compatible with all latest generation controllers
whose serial connector is not reachable unless cover is removed:
 COMBIAC0
 COMBIACX
 ACE3
 VCM