Zapi ADPZP0CC Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 36

Zapi ADPZP0CC Скачать руководство пользователя страница 24

Page - 24/36

ADPZP0CC - MHYRIO FLASH CONTROLLER - User Manual

7.5 Description of parameters that may be programmed (parameter

change)

In addition to the Configuration, Parameter settings may be made by Zapi using
standard default settings, settings to Customer Specifications, or the customer
can make changes according to the application, using a Digital Console. During
the setting up procedure on the machine, the Console can remain connected to
the controller during travel. The Parameters can be modified in real time, during
operation. Pay attention to the polarity of the Console Connector.
CONNECTION OF THE CONSOLE TO THE CONTROLLER MUST BE MADE
WITH THE KEY SWITCH TURNED OFF.
The following Parameters can be modified:

1) MIN

EV2

This parameter adjusts the minimum current of valve 2, if it is set as
proportional (see "set options menu").

2) MIN

EV1

This parameter adjusts the minimum current of valve 1, if it is set as
proportional (see "set options menu").

3) MIN

EV3

This parameter adjusts the minimum current of valve 3, if it is set as
proportional (see "set options menu").

4) MIN

EV4

This parameter adjusts the minimum current of valve 4, if it is set as
proportional (see "set options menu").

5) MIN

EV5

This parameter adjusts the minimum current of valve 5, if it is set as
proportional (see "set options menu").

6) MIN

EV6

This parameter adjusts the minimum current of valve 6, if it is set as
proportional (see "set options menu").

7) MIN

EV7

This parameter adjusts the minimum current of valve 7, if it is set as
proportional (see "set options menu").

8) MIN

EV8

This parameter adjusts the minimum current of valve 8, if it is set as
proportional (see "set options menu").

9) MAX

EV2

This parameter adjusts the maximum current of valve 2, if it is set as
proportional (see "set options menu").

10) MAX EV1

This parameter adjusts the maximum current of valve 1, if it is set as
proportional (see "set options menu").

11) MAX EV3

This parameter adjusts the maximum current of valve 3, if it is set as
proportional (see "set options menu").

12) MAX EV4

This parameter adjust the maximum current of valve 4, if it is set as
proportional (see "set options menu").

13) MAX EV5

This parameter adjusts the maximum current of valve 5, if it is set as
proportional (see "set options menu").

«
...
22
23
24
25
26
...
»

Содержание ADPZP0CC





































Отзывы:

Нет отзывов