zapco Z-series, Руководство пользователя

Страница: 8 / 20

Connect your source unit to the amplifier using the "INPUT" RCA connectors. The "OUTPUT" connector
can be used to pass the input signal to another amplier. For Initial Setup: Always set bass boost to 0dB,
and set the amplifier gain to minimum (8V sensitivity). Remember: amp gain is not a volume control.
It is used only to match your amplifier input sensitivity to your source unit output.
to INPUT of
ADDITIONAL
AMPLIFIERS
Wired Remote Control
(optional)
RCA CONNECTION
Z-150.2
HEAD UNIT
250Hz 12dB 30Hz 0dB
LPF BASS
CH1
CH2
CH1
CH2
PWR
PRT
HPF LPF
REMOTE
500Hz 50Hz
FULL
INPUT
0.2V 8V
GAIN
OUTPUT
HPF
Z-400.2
Wired Remote Control
(optional)
HEAD UNIT
to INPUT of ADDITIONAL
AMPLIFIERS
-7-