zapco ST-X DSP III Series, Руководство пользователя

Страница: 11 / 15

21
Equalizer : The lower section of the GUI is devoted to equalization.
Here are 15 bands of parametric equalization for each output channel and you can vary
Frequency, Gain, and Q (the shape of the adjustment) for each band in several ways.
Frequency: Each band is numbered. You can simply click onto a band button and drag it
to where you want it. When you click onto a band there is a
“Heads-up display” of the frequency, gain, and Q of the band. Any band that has been
adjusted from 0dB is highlighted by the green dot under the band’s slider.
Band # shows in Red, as do the Gain, You can click into the Gain or Q value
Freq, and Q. The green squares show box of any band and adjust using the
the width (Q) of the filter. up/down arrow keys.
20
Phase/Level : The next section is for adjusting levels and checking Polarity to be sure all
speakers are in phase with each other.
There are a number of systems for checking System Phase. If the systems speakers are
not all in phase there will be issues you can not fix by tuning. You can see the section on
System Phasing to see one method of Phase checking.
The MUTE buttons allow you to turn off any speakers that you do not want to hear while
you are tuning other speakers.
You will also find a master level control here and a system MUTE button.