zapco ST-X DSP 2021, Руководство пользователя

Страница: 13 / 28

The ST-X DSP GUI Program
Before beginning the setup be sure all signal sources are turned fully down so
there is no volume until after the crossovers are set.
The control program (GUI) for the ST-X DSP amplifiers is the same functionally
for both the 4-Ch ST-4X DSP and the 6-Ch ST-6X DSP except for the number of
channels. Both will have a default system in the channel designation column
but since you have complete control over all functions, you can use all channels
as they best suit your individual system.
Loading the GUI
Download the GUI (Graphic User Interface) from www.zapco.com > Downloads,
if you have not already done that, and load the GUI from the .exe file.
Connecting the PC: Connect the PC to the ST-X DSP amp using the supplied
USB cable. NOTE: The ST-X DSP GUI is very forgiving about PC Screen resolution.
However the ideal resolution 1600 x 900 optimal on most PC’s.
13