CAUTION:
Before performing maintenance, unplug the insect zapper.
REGULAR MAINTENANCE
1. Always disconnect the appliance from the power supply before cleaning.
2. Never use water to clean the unit. Water may damage the electrical components.
Wipe the safety guard and external casing with a damp cloth.
3. Using a small brush or stick, gently remove any insect remains from the bottom and enclosure.
4. Once the unit is clean, return unit to hanging position and reconnect the power source.
REPLACING THE BULB
1. Unplug and remove entire unit from hanging position.
2. Turn the unit upside down. Do not rest the unit on surface without continuing to
support it. It will not stand on it’s own.
3. Take off cover.
4. Carefully remove the old bulb, using caution as it may still be hot.
5. Install the replacement bulb (#60515WATT) and make sure it is
properly seated in the socket.
6. Check the glue trap for excessive debris and replace (with #517RGB100) if necessary.
7. Make sure the cover is closed securely.
8. Place the unit back into the hanging position.
WARNING
ELECTRICAL SHOCK HAZARD
Keep water and other liquids from entering the inside of the unit. Liquid inside the unit could cause an electrical shock.
Do not spray with water or cleaning products. Liquid could contact the electrical components and cause a short circuit
or an electrical shock. Do not use unit if power cord is damaged or has been modified.
TROUBLESHOOTING
MAINTENANCE
SYMPTOM
POSSIBLE CAUSE(S)
CORRECTIVE ACTION(S)
The unit is not working
Power Supply
Check power supply. Make sure the unit is
plugged into working outlet.
Bulb has expired, is faulty, or has
not been fitted correctly
Check bulb to make sure it is seated properly.
Replace bulb if necessary.
Plug and/or cable are damaged
Replace the product
Bottom cover not screwed on
Secure bottom enclosure
All Zap N Trap Insect Trap/Zappers are backed
by a six (6) month replacement warranty.
