background image

TECHNICAL DATA

The technical information is situated in the rating
plate on the internal side of the appliance and on
the energy label.
The QR code on the energy label supplied with the
appliance provides a web link to the information

related to the performance of the appliance. Keep
the energy label for reference together with the
user manual and all other documents provided with
this appliance.

INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any
EcoDesign verification shall be compliant with BS
EN 62552. Ventilation requirements, recess
dimensions and minimum rear clearances shall be

as stated in this User Manual at Chapter 3. Please
contact the manufacturer for any other further
information, including loading plans.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol 

. Put the

packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked

with the symbol 

 with the household waste.

Return the product to your local recycling facility or
contact your municipal office.

14

*

Содержание ZXAN13FW0

















Отзывы: