27
8. GUARANTEE
Depends to the Sales Company.
9. AFTER SALES SERVICE
If you have an operating problem, refer to the "Operating problems" section. If any work is necessary after you have
made all your checks, your washing machine dealer is the first person authorized to take action. Otherwise, you can
always call Consumers Help that will inform you of the address of an After Sales Service.
When you call the After Sales Service, mention the model and product number of your washing machine, and its serial
number. This information is given on the inside of the filter door and on the name plate at the back of the washing
machine.
If any work is done on your washing machine, insist that your After Sales Service uses manufacturer certified spare
parts.
The «
DRUM
POSITIONNING
»* light** is not on at the
end of the cycle:
•
the drum could not reach the right position due to a persis-
tent unbalanced mass; turn the drum manually.
The «End»* light
**
flashes 4 times
***
:
•
the cover is not correctly closed.
The «End»* light ** flashes 2 times***:
•
the drain filter is blocked,
•
the drain pipe is blocked or kinked,
•
the drain pipe is too high (see «installation»),
•
the drain pump is blocked,
•
the installation siphon is blocked.
The «End»* light ** flashes 1 time***:
•
the water tap is closed,
•
the water network has been cut off.
The «End»* light** flashes 10 times***:
•
the flaps of the drum door are opened.
Softener of Javel water flows through the over-
flow orifice when filling* :
•
you did not put in the right amount,
•
the siphons at the back of the detergents dispenser are
blocked.
* Depending on the model.
** Eliminate the causes of the failure if you find them, and then press on the «Start/Pause» pusbutton to restart the
interrupted program.
*** Depending on the model, some acoustic signals may be activated.
Symptom
Cause
