background image

Programme / Type of washing

Load/Time

Possible options

Jeans (40°) :  For washing denim clothes. The Rinse

plus option is activated.

3,0 kg

130-140 min

Rinse hold, Prewash, Delay start

Sport (40°) :  For dirty outside sport clothes. The

Prewash option is activated.

2,5 kg

95-105 min

Rinse hold, Rinse plus, Delay start

Curtains (40°) :  For washing curtains. The Prewash

option is activated.

2,5 kg

90-100 min

Rinse hold, Rinse plus, Delay start

Easy iron (40°) :  For cottons and synthetics. Reduces

creasing and makes ironing easier.

1,0 kg

90-100 min

Rinse hold, Prewash, Rinse plus, Delay start

Soak (30°) :  Soaking for very dirty washing. The

drum stops full of water.

5,5 kg

15-25 min

Delay start

Rinses :  Hand washed items can be rinsed in this

programme.

5,5 kg

50-60 min

Rinse hold, Rinse plus, Delay start

Drain :  Runs an empty cycle after a Rinse hold (or

Night cycle plus).

5,5 kg

0-10 min

 

Spin :  A spin cycle from 500 to 1000 rpm after a

Rinse hold (or Night cycle plus).

5,5 kg

10-20 min

Delay start

1) Reference programme for test conforming to CEI 456 standard (60° Eco programme) : 49 L / 1,04 kWh / 170 min

Care and cleaning

Unplug the appliance before cleaning.

Descaling the appliance

To descale the appliance, use an appropriate non-corro-

sive product designed for washing machines. Read prod-

uct label for recommended amounts and how often des-

caling should be carried out.

The exterior

Use warm soapy water to clean the exterior of the appli-

ance. Never use alcohol, solvents or similar products.

Dispenser box

To clean, proceed as follows :

1

 

2

Object trap

Regularly clean out the object trap which is located at the

bottom of the drum :

1

 

2

3

 

Check if the filter being coupled well be-

fore closing the trap to pull up and down

the central wall.

6

 

Содержание ZWQ 5100













Отзывы: