background image

Safety Information

Please read these points carefully before installing and

using your appliance. Keep this user manual with your

appliance.

General safety

• Do not modify or attempt to modify this appliance. This

would put yourself in danger.

• Ensure that all coins, safety pins, brooches, screws etc

have been removed before starting a washing pro-

gramme. If left in washing, they can seriously damage

the appliance.

• Use the recommended quantity of detergent.
• Put small items together (socks, belts etc.) in a small

linen bag or pillow case.

• Unplug and close inlet hose tap after using appliance.
• Always disconnect the power supply from the appli-

ance before cleaning or maintenance.

• Do not machine wash clothes with ribbing, unfinished

or torn material.

Installation

• Unpack or ask for the appliance to be unpacked im-

mediately upon delivery. Check the outside of the ap-

pliance is not damaged in any way. Report all transit

damage to your retailer.

• Remove all transit bolts and packaging before instal-

ling the appliance.

• Connection to the water supply must be carried out by

a qualified plumber.

• If your domestic electrical circuit needs adapting to

allow the appliance to be plugged in, use a qualified

electrician.

• Ensure that, after installation, the power cable is not

trapped under the appliance.

• If the appliance is installed on carpeted floor, ensure

that the carpet does not obstruct any ventilation ducts

located at the base of the appliance.

• The appliance must be equipped with an earthed power

plug which conforms to regulations.

• Before connecting your appliance to the power supply,

carefully read the instructions in the chapter entitled

“Electrical connection”.

• Replacing the power cable should only be carried out

by an authorised service engineer.

• The manufacturer cannot be held responsible for any

damage resulting from incorrect installation.

Precautions to be taken against frost

If your appliance is exposed to temperatures below 0°C,

the following precautions must be taken:
• Close the tap and disconnect the inlet hose.
• Place the end of this hose and the drain hose in a basin

on the floor.

• Select the Drain programme let it run until the end of

the cycle.

• Disconnect the appliance from the power supply by

turning the programme selector to “Stop”   .

• Unplug the appliance.
• Replace the inlet hose and drain hose.

This way, the water remaining in the hoses will be drained

away, avoiding any ice formation which would damage

your appliance.

Before turning your appliance on again, ensure that it is

installed in an area where the temperature will not fall

below freezing.

Use

• Your appliance is intended for normal domestic use.

Do not use the appliance for commercial or industrial

purposes or for any other purpose.

• Refer to the instructions on the label of each item before

washing.

• Do not put items into the washing machine which have

had stains removed with petrol, alcohol, trichlorethy-

len etc. If such stain removers have been used, wait

until the product has evaporated before putting these

items into the drum.

• This appliance is not intended for use by persons (in-

cluding children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowl-

edge, unless they have been given supervision or in-

struction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do

not play with the appliance.

 

3

Содержание ZWQ 5100













Отзывы: