Zanussi ZWH 6130 P, Руководство пользователя

Страница: 25 / 32

The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked
• Clean the water inlet filters (read "Cleaning the water inlet filters"
for more details).
The light of button 6 flashes and the light 7.2 illuminates: Problem with the water
drainage
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged
• If the appliance stops working without discharging the water , first
carry out an emergency drain:
– Turn the programme selector dial to
;
– Unplug the appliance;
– Close the water tap;
– If necessary, wait until the water has cooled down;
– Unscrew the drain hose from the rear support (see "Frost pre-
caution") and unhook it from the sink or spigot;
– Let it run along the floor;
– Place a bowl on the floor and place the end of the draining hose
into the bowl. The water should drain by gravity into the bowl.
When the bowl is full, empty it. Repeat the procedure until water
stops flowing out ;
– Screw the draining hose to the rear support and reposition it;
– Open the door and remove the laundry;
– Carry out the drain filter cleaning as described in "Cleaning the
drain filter";
– At the end of cleaning action, close the door and insert the
mains plug again;
– Run a drain programme to check if the appliance works now.
The light of button 6 flashes and the light 7.3 illuminates: Door open
25
www.zanussi.com