6
Start/Pause
Start /Pause
Start the programme by pressing the button 6
• To
start
the selected programme, press the button
6
, the
corresponding green pilot light stops flashing. The pilot light
7.1
illuminates to indicate that the appliance starts operat-
ing and the door is locked. If you have chosen a delayed
start, the appliance will begin the countdown.
• To
interrupt
a programme which is running, press the but-
ton
6
: the corresponding green pilot light starts flashing. It
is possible to
change
some options of a running pro-
gramme before the programme carries them out.
• To
restart
the programme from the point at which it was in-
terrupted, press the button
6
.
• After the programme has started the door is locked. If, for
any reason, you need to
open the door
, set firstly the ap-
pliance to PAUSE by pressing the button
6
. After a few mi-
nutes it will be possible to open the door.
If the door remains locked, this means that the appliance is
already heating or that the water level is too high. In any
case, do not try to force the door!
If you cannot open the door but you need to open it you
have to switch the appliance off by turning the selector dial
to
. After a few minutes the door can be opened (
pay
attention to the water level and temperature!
). After
closing the door, it is necessary to select the programme
and options again and to press the button
6
.
,
.
7.1
7.2
7.3
Indicator pilot lights
• When you start the programme by pressing the button
6
,
the washing phase pilot light (
7.1
) illuminates. This means
that the appliance is operating.
• The additional rinses pilot light (
7.2
) illuminates when the
appliance performs an extra rinse.
• When the programme has finished the end cycle pilot light
(
7.3
) comes on.
At the end of the programme
The appliance stops automatically. The pilot
light of the button
6
and the pilot light corre-
sponding to the just finished washing phase go
off. The light
7.3
illuminates.
If a programme or an option that ends with wa-
ter left in the tub has been selected and the
door remains locked to indicate that the water
must be emptied out before opening the door.
Follow the below instructions to empty out the
water:
• Turn the programme selector dial to
.
• Select the draining or spinning programme.
• Reduce the spin speed if needed, by press-
ing the relevant button.
• Press the button
6
.
At the end of the programme, the door can be
now opened. Turn the programme selector dial
to
to switch the appliance off.
Remove the laundry from the drum and carefully
check that the drum is empty. If you do not in-
tend to carry out another wash, close the water
18
www.zanussi.com
Содержание ZWH 6130 P
