Zanussi ZWG580E, Руководство пользователя

Страница: 17 / 20

Problem Possible solution
You cannot open the appli-
ance door.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in the drum.
The appliance makes an
unusual noise.
Make sure the levelling of the appliance is correct. Refer to 'Installa-
tion'.
Make sure that the packaging and/or the transit bolts are removed. Re-
fer to 'Installation'.
Add more laundry in the drum. The load may be too small.
The washing results are
not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before you wash
the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
You cannot set an option. Make sure that you press only the wanted button(s).
After the check, activate the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
TECHNICAL DATA
Dimension Width/ Height/ Depth/ To-
tal depth
552 mm/ 850 mm/ 600 mm/ 642 mm
Electrical connection Voltage
Overall power
Fuse
Frequency
220-230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against
moisture
IPX4
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum Load Cotton 6 kg
Energy Efficiency Class A+
Spin Speed Maximum 800 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
17