Zanussi ZWG580E, Руководство пользователя

Страница: 16 / 20

Problem Possible solution
Make sure that there is not a damaged fuse in the fuse box.
Make sure that the Start/Pause has been pressed.
If the delay start is set, cancel the setting or wait for the end of count-
down.
The appliance does not fill
with water properly.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For this
information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filters of the inlet hoses and the filters of the valves
are not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hoses have no kinks or bends.
Make sure that the connections of the water inlet hoses are correct.
The appliance does not fill
with water and drain imme-
diately.
Make sure that the drain hose is in the correct position. The hose may
be too low.
The appliance does not
drain the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the filter, if neces-
sary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without drain phase.
Set the drain programme if you set an option which ends with water in
the tub.
The spin phase does not
operate or the washing cy-
cle lasts longer than usual-
ly.
Set the spin programme.
Make sure that the drain filter is not clogged. Clean the filter, if neces-
sary. Refer to 'Care and cleaning'.
Adjust manually the items in the tub and start the spin phase again.
This problem may be caused by balance problems.
There is water on the floor. Make sure that the couplings of the water hoses are tight and there is
not water leakages.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the correct quantity of it.
16