Problem
Possible solution
Too much foam in the
drum during the wash-
ing cycle.
• Reduce the quantity of detergent.
After the check, activate the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre on the rating plate.
CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant standards. Different cau-
ses can change the data: the quantity and type of laundry and ambient temperature. Wa-
ter pressure, the supply voltage and the temperature of inlet water may also affect the
washing programme duration.
Technical specifications may be changed without prior notice to improve the quality of
product.
At the start of the programme, the display shows the programme duration for the maxi-
mum load capacity.
During the washing phase the programme duration is automatically calculated and can be
greatly reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton
60°C, maximum load capacity 7 kg, the programme duration exceeds 2 hours; actual load
1 kg, the programme duration will be less than 1 hour).
When the appliance is calculating the real programme duration a dot flashes in the dis-
play.
Programmes
Load (kg)
Energy con-
sumption
(kWh)
Water con-
sumption (litre)
Approximate
programme du-
ration (mi-
nutes)
Cottons
60°C
7
1.34
68
157
Cotton ECO
60°C
1)
7
0.92
45
250
Cottons
40°C
7
0.78
61
157
Synthetics
40°C
3
0.60
56
103
Delicates
40°C
3
0.55
59
81
22
