7
• “
Rinse Hold
” position:
when you choose this option, the machine will not drain
the water of the last rinse, so as not to crease the
laundry.
At the end of the cycle, the door is locked, the light of
the “
Start/Pause
” button goes out, a flashing zero will
appear on the display and the pilot light of “
Rinse
Hold
” position remains lit, to indicate that the water
must be drained and .
To complete the cycle, press “
Skip Reset
” button
once
,
all the leds are off, the display will show three flashing
dashes, then choose one of the following options:
•
Drain only:
select any washing programme by means
of the
FABRIC
button (3) and press repeatedly the
“
Skip Reset
” button until the only led “
Drain
” on the
programme progress display illuminates. Depress
“
Start/Pause” button.
• Drain and Spin:
press
FABRIC
button in order to
select the desired programme and press the “
Skip
Reset
” button until the only led “
Spin
” on the
programme progress display illuminates.
You can change the spin speed by means of “
Spin
”
button if needed, then depress “
Start/Pause” button
.
6 WASH CHOICE button
Press this button to select the following options:
•
Prewash
: select this option if you wish your laundry
to be prewashed at 30° C before the main wash (
not
available for Wool/Handwash programme).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
•
Intensive:
this option can be selected for heavily
soiled laundry.
If you depress this button the washing intensity will
be increased and the washing time will be prolonged
by few minutes depending on the selected type of
fabric.
This option can be selected with all
cottons
and
synthetic
programmes except for
Cotton Daily
programme.
The
Intensive
and the
40° AA
options
cannot
be
selected together.
•
Extra Quick
: select this option for laundry that is
only slightly soiled (
not available for Cottons Daily
and Wool/Handwash programmes or in
combination with the 40° AA option
).
The washing time will be reduced according to the
type of fabric and the selected temperature.
The
Prewash
, the
Intensive
and the
Extra Quick
options
cannot
be selected together by means of the
same button.
7 OPTIONS button
Press this button to select the following options:
•
Super Rinse
: this option can be selected with all
programmes
except the Wool/Handwash
programme.
The machine will add 2 rinses to the
cotton programmes and 1 rinse to the synthetic and
delicate programmes. This option is recommended for
people who are allergic to detergents, and in areas
where the water is very soft.
•
40° AA
: this option
can
be selected for
Cottons
and
Synthetics
lightly or normally soiled with a
temperature of 40°C or higher.
The washing temperature will be reduced and the
washing time will be prolonged in order to achieve an
AA class in energy efficiency and washing
performance (
not available for Cottons Daily
programme or in combination with the Intensive
and Extra Quick options).
The
Super Rinse
and the
40° AA
options
cannot
be
selected together by means of the relevant button.
8 Display
The following pieces of information are shown on the
display:
•
Three flashing dashes
, when a programme is
cancelled by means of the “
Skip Reset
” button.
The three flashing dashes will also appear when you
press the “
On/Off
” button to switch the machine on, if
the previously selected cycle has been erased.
---
