Zanussi ZW74PDBI Скачать руководство пользователя страница 24

Страница: 24 / 44

Programme

Universal pow-

der

Liquid Universal Liquid for colour-

eds

Delicates wool-

lens

Special

Denim

▲

Wool/Hand-

wash

▲

1) At temperature higher than 60 °C the use of powder detergent is recommended.

▲

= Recommended

-- = Not recommended

SETTINGS

ACOUSTIC SIGNALS
This appliance has different acoustic signals, that

operate when:
• You activate the appliance (special short tune).

• You deactivate the appliance (special short

tune).

• You touch the buttons (click sound).

• You make an invalid selection (3 short sounds).

• The programme is completed (sequence of

sounds for about 2 minutes).

• The appliance has a malfunction (sequence of

short sounds for about 5 minutes).

To deactivate/activate the acoustic signals set a

one of the programme, touch the Flextime and the

Delay Start buttons simultaneously for about 2

seconds. The display shows On/Off

If you deactivate the acoustic signals,

they continue to operate when the

appliance has a malfunction.

OPERATING HOURS COUNTER
It is possible to visualise the total operating time of

the appliance in hours, starting from the first

switching on. This value will count operating time of

the cycles (does not include pauses, delayed start

time). To visualise this value, proceed as follows:
1. Switch the appliance on by pressing On/Off

button.

2. Turn the programme knob to the Eco 40-60

programme (1st position clockwise).

3. Press and hold the Flextime and Delay Start

buttons for some seconds (within 10 seconds

after the switching on. After these 10 seconds,

the key combination activates and deactivates

the acoustic signals).

4. After 3 seconds the total hours operated by the

appliance are shown in the display: e.g. 1276

hours, the display shows the text Hr for 2

seconds, 12 (thousands and hundreds) for 2

seconds and 76 (tens and units).

If the procedure does not work (due to

timeout, wrong programme dial

position or wrong keys combination),

switch the appliance off and repeat

sequence from the beginning.

FACTORY RESET
This function allows to restore the factory default

options. To activate this option follow steps below:
1. Switch the appliance on by pressing On/Off

button.

2. Turn the programme knob to the Synthetics

programme (3rd position clockwise).

3. Press and hold the Flextime and Delay Start

buttons for some seconds (within 10 seconds

after the switching on. After these 10 seconds,

the key combination activates and deactivates

the acoustic signals).

4. The display will show

for about 5

seconds.

If the procedure does not work (due to

timeout, wrong programme dial

position or wrong keys combination),

switch the appliance off and repeat

sequence from the beginning.

BEFORE FIRST USE

1. Make sure that the electrical power is available

and the water tap is open.

Содержание ZW74PDBI













































Результаты поиска

Содержание ZW74PDBI

Отзывы:

Zanussi ZW74PDBI, Руководство пользователя, Страница: 24 / 44

Результаты поиска

Содержание ZW74PDBI

Отзывы: