Zanussi ZW74PDBI, Руководство пользователя, Страница: 19 / 44

To activate/deactivate this option , hold down
the Prewash button until relevant indicator
comes on/goes off.
SPIN
When you set a programme, the appliance
automatically sets the maximum spin speed allowed
except programme Denim.
Push this button to set additional spin
options:
• Decrease the spin speed. The display shows
only the spin speeds available for the set
programme.
• No spin comes on display.
Set this option to deactivate all spin phases. The
appliance performs only the draining phase of
the selected washing programme. Set this
option for very delicate fabrics. The rinse phase
uses more water for some washing programmes
• Rinse hold . The related indicator comes
on.
The final spin is not performed. The water of the
last rinse is not drained out to prevent the
fabrics from creasing. The washing programme
ends with water in the drum.
The door stays locked and the drum turns
regularly to reduce creasing. You must drain the
water to unlock the door.
If you touch the Start/Pause
button, the
appliance performs the spinning phase and
drains the water.
• Quiet . The related indicator comes on.
The intermediate and the final spinning phases
are suppressed and the programme ends with
water in the drum. This helps to reduce
creasing. The door stays locked. The drum turns
regularly to reduce creasing. You must drain the
water to unlock the door.
As the programme is very quiet, it is suitable for
use at night time when cheaper electricity tariffs
are available. In some programmes the rinses
are performed with more water.
If you touch the Start/Pause
button, the
appliance performs only the draining phase.
The appliance empties the water out
automatically after approximately 18
hours.
CHILD LOCK
With this option you can prevent children from
playing with the control panel.
• To activate/deactivate this option, hold down
the Spin button until comes on/goes off
on the display.
The appliance will default to this option after you
switch it off.
The Child Lock function may not be available for a
few seconds after switching the appliance on.
TEMP.
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Touch this button repeatedly until the desired
temperature value appears on the display.
When the display shows the indicators
, the
appliance does not heat the water.
ON/OFF
Press this button for a few seconds to activate or
deactivate the appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically deactivates
the appliance after several minutes to reduce the
energy consumption, you may need to activate the
appliance again.
For more details, refer to Stand-by paragraph in
Daily Use chapter.
19