38
20mm
A
50mm
PR166
P R 3 3 / 2
C
A
PR168
5. Place guide (A) on the inside part of the furniture
door, in the upper and lower positions as shown in
the figure and mark the position of external holes.
After having drilled holes, fix the guide with the
screws supplied.
8. Should adjustment of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
9. Push cover (D) into guide (B) until it clips into
place.
6. Push cover (C) into guide (A) until it clips into
place.
7. Open the appliance door and the furniture door at
90°. Insert the small square (B) into guide (A). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and drill holes with Ø 2 mm at
8 mm from the outer edge of the door. Place the
small square on the guide again and fix it with the
screws supplied.
8mm
PR167
A
B
PR167/1
D
B
