Zanussi ZTH 488, Руководство пользователя

Страница: 14 / 16

Technical data
height x width x depth 85 x 60 x 58 cm
drum volume 108 l
depth with the load door opened 109 cm
adjustable height 1.5 cm
the appliance weight 55 kg
maximum load volume 8 kg
voltage 230 -240 V
necessary fuse 13
total power 900 W
energy efficiency class A
energy consumption kWh/cycle
1)
2,15 kWh
annual energy consumption 121,3 kWh
type of use Domestic
permitted ambient temperature + 5°C to + 35°C
1) 8 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121
Machine settings
Setting Implementation
BUZZER permanent off 1. Turn the programme selector to any programme.
2.
Press simultaneously the INTENSIVE and LONG ANTI-
CREASE buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off.
Water hardness
Water contains, a variable
quantity of limestone and miner-
al salts of which quantities vary
according to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sen-
sitivity of the drying sensor
based on conductivity values of
the water.
1. Turn the programme selector to any programme.
2.
Press simultaneously the LONG ANTICREASE and START/
PAUSE buttons and hold down for approx. 5 seconds. The current
setting is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3. Press the START/PAUSE button sequentially until you set desired
level.
4.
To memorize setting press simultaneously the the LONG ANTI-
CREASE and START/PAUSE buttons or turn knob to O off position
14
www.zanussi.com