Zanussi ZTH 488, Руководство пользователя

Страница: 12 / 16

If the programme has been interrupted as
a result of the water reservoir being full:
Press the START/PAUSE button to continue
the drying cycle.
Cleaning fluff filters
The filters collect all the fluff which accumulates
during drying. To ensure that the dryer works
perfectly, the fluff filters (micro-fine filter and
fine strainer) must be cleaned after every drying
cycle.
Caution! Never operate the dryer without
fluff filters or with damaged or blocked fluff
filters.
Cleaning heat exchanger filters
If the warning lamp CONDENSER lights, the
heat exchanger fluff filters in the base of the ap-
pliance must be cleaned
• Never operate the dryer without the fluff fil-
ters.
• Clogged filters cause higher energy con-
sumption (drying cycle elongation) and dryer
damage.
• A dirty heat pump can only be cleaned up by
means of a costly process.
• As necessary, approx. once every 6 months,
remove the fluff from the heat exchanger us-
ing the sponge supplied. When doing this,
please use rubber gloves.
6 *
9
7
10
* if necessary (approx. once every 6 months)
remove the fluff from the heat exchanger using
the sponge supplied (put on rubber gloves)
Cleaning the drum
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside of
the drum. The degree to which the laundry has
been dried is then no longer detected reliably.
The laundry is damper than expected when re-
moved from the appliance.
Use a standard domestic cleaner (e.g. vinegar-
based cleaner) to wipe down the inside of the
drum and drum ribs.
Clean control panel and housing
Caution! Do not use furniture cleaners or
aggressive cleaning agents to clean the
machine.
Use a damp cloth to wipe down the control
panel and housing.
12
www.zanussi.com