Clean operating screen and housing
Caution!
Do not use furniture cleaners or
aggressive cleaning agents to clean the
appliance.
Use a damp cloth to wipe down the operating
screen and housing.
What to do if ...
Problem
Possible cause
Remedy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic installa-
tion).
Loading door is open.
Close loading door.
Have you pressed the
START
PAUSE button?
Press the
START PAUSE but-
ton again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Programme
chart” chapter).
Fluff filter clogged.
Clean fluff filter.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots covered up.
Uncover ventilation slots.
Residue on inside surface of drum
or drum ribs.
Clean inside surface of drum and
drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
1)
Re-programme standard setting
for degree of drying (see ‘Machine
settings’ chapter)
1)
.
Loading door does not close.
Filter not in place
2)
.
Install filter into place
2)
.
Drying cycle ends shortly after pro-
gramme starts.
Not enough washing loaded or
washing loaded is too dry for se-
lected programme.
Select time programme or higher
drying level (e.g. EXTRA DRY in-
stead of CUPBOARD DRY ).
Drying cycle lasts an unusually
long time. Note: After around 5
hours the drying cycle ends auto-
matically.
Filter clogged.
Clean filter.
Load volume too big.
Reduce load volume.
Laundry insufficiently spun.
Laundry must be adequately spun.
1)
Only dryers with conductance programming
2)
Only dryers with removable filter
Machine settings
BUZZER permanent off
1.
Turn the programme selector to any pro-
gramme.
2.
Press simultaneously the
DELICATE
and
TEXTILE
buttons and hold down for
approx. 5 seconds.
3.
The buzzer is by default always off.
9
www.zanussi.com
