background image

Problem

Possible cause and solution

Unusual foam during washing.

• Use the detergent designed specifically for dishwashers.

• There is a leak in the rinse aid dispenser. Contact an Author-

ised Service Centre.

Traces of rust on cutlery.

• There is too much salt in the water used for washing. Refer to 

"The water softener".

• Silver and stainless steel cutlery were placed together. Do

not put silver and stainless steel items close together.

There are residues of detergent

in the dispenser at the end of the

programme.

• The detergent tablet was stuck in the dispenser and therefore

was not completely washed away by water.

• Water cannot wash away the detergent from the dispenser.

Make sure that the spray arms are not blocked or clogged.

• Make sure that items in the baskets do not impede the lid of

the detergent dispenser from opening.

Odours inside the appliance.

• Refer to "Internal cleaning".

• Start the Machine Care programme with a descaler or a

cleaning product designed for dishwashers.

Limescale deposits on the table-

ware, on the tub and on the in-

side of the door.

• The level of salt is low, check the refill indicator.

• The cap of the salt container is loose.

• Your tap water is hard. Refer to "The water softener".

• Use salt and set regeneration of the water softener even

when multi-functional tablets are used. Refer to "The water

softener".

• Start the Machine Care programme with a descaler designed

for dishwashers.

• If limescale deposits still remain, clean the appliance with ap-

pliance cleaners which are particularly suitable for this pur-

pose.

• Try a different detergent.

• Contact the detergent manufacturer.

Dull, discoloured or chipped ta-

bleware.

• Make sure that only dishwasher-safe items are washed in the

appliance.

• Load and unload the basket carefully. Refer to the basket

loading leaflet.

• Place delicate items in the upper basket.

Refer to "Before first use""Daily

use", or "Hints and tips" for other

possible causes.

TECHNICAL INFORMATION

Dimensions

Width / height / depth (mm)

446 / 818 - 898 / 550

Electrical connection 

1)

Voltage (V)

220 - 240

Frequency (Hz)

50

Water supply pressure

Min. / max. bar (MPa)

0.5 (0.05) / 8 (0.8)

21

Содержание ZSLN2321

























Отзывы: