![Zanussi ZRC 704 CS Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/zanussi/zrc-704-cs/zrc-704-cs_instruction-booklet_939004005.webp)
5
Ubicaci—n estantes de la
contrapuerta
Para permitir el almacenamiento de alimentos de
varias dimensiones, se pueden colocar les repisas a
diferentes alturas. Procedan de esta manera:
Empujen la repisa en el sentido de la flecha inasta
cuando no estŽ libre y volverla a colocar a la altura
deseada.
D006
D040
Rejillas movibles
En las paredes del compartimento existen unas
gu’as que consienten poner las rejillas a distintas
alturas.
D026
D671
Circulaci—n de aire
Dentro del aparato hay un ventilador (DAC) que se
enciende con el interruptor. El chivato se enciende.
Se aconseja utilizar el ventilador cuando la
temperatura ambiente supera los 25¡C, con el
mando puesto en la posici—n identificada por el
s’mbolo (ver la fig.).
Con temperatura ambiente inferior a los 25¼C es
posible utilizar en ventilador con el mando puesto en
cualquier posici—n.
6
5
4
3
2
1
O
Refrigerac’on de alimentos y bebidas
Para utilizar de la mejor manera el compartimiento
refrigerante, es necesario:
¥ no introducir comidas calientes o l’quidos en en
evaporac’on;
¥ tapar o envolver los alimentos, especialmente si
son arom‡ticos;
¥ no colocar sobre las rejillas papeles, cartones o
pl‡sticos que obstaculicen la circulac’on del aire.
24
Open the appliance door and the furniture door at
90¡. Insert the small square (B) into guide (A). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and drill holes with ¿ 2 mm at
8 mm from the outer edge of the door. Place the
small square on the guide again and fix it with the
screws supplied.
8mm
PR167
A
B
Place guide (A) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
20 mm
A
50mm
PR166
PR33
C
A
Fix cover (C) on guide (A) until it clips into place.
PR168
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.