36
Door reversibility
Operate as follows:
Open the upper door and release the screws fixing
the middle hinge (A - Fig. 1) to the cabinet; remove
the middle hinge from its seating, by lifting the
doors.
Fig. 1
Slide out both doors from the upper and lower
hinges.
Using an open-ended spanner, remove the door
pivot (B - Fig. 2) from hinge (A - Fig. 2) and refit it
on the hinge provided on the opposite side of the
cabinet.
Repeat the above procedure to refit the same items
of the lower section.
Fig. 2
D148
A
D310
A
B
C
Remove the door frames (A-B-C-D - Fig. 3).
Fig. 3
Refit the door stop hinges and relevant bushes (Fig.
3) on the opposite side of the door. Refit door frames
(A-B-C-D) as follows:
frame (A) in place of frame (B), and vice-versa;
frame (C) in place of frame (D), and vice-versa.
Fix the doors in the new position, making sure that
the door pivots of the upper and lower hinges fit
correctly in their housings.
Remove the plastic plugs from their seat and refit
them into the holes left free on the opposite side.
Raise the two doors to allow insertion of the central
hinge (Fig. 1), then fix it to the cabinet by means of
the previously removed screws.
Fitting the handle
To fit the door handle, release the screws from the
door inner edge, centre the handle on the holes and
secure by means of the same screws.
D254
A
C
D
B
