18
Replacing the Oven Light
If the oven bulb needs replacing, it must comply with the
following specifications: Power, 15 or 25 W; Voltage, 230 V
(50 Hz); Temperature Rating of 300 °C; Thread type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb (Fig. 32):
1. Ensure the oven is disconnected from the electrical
supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
Fig. 32
Fig. 29
Fig. 30
Fig. 31
Cleaning The Oven Door
Before cleaning the oven door, we recommend you to
remove it from the oven.
Proceed as follows:
1. Open the oven door completely;
2. Find the hinges linking the door to the oven (fig. 29);
3. Unlock and turn the small levers located on the two
hinges (fig. 30);
4. Handle the door by its left- and right-hand sides, then
slowly turn it towards the oven until it is half-closed
(Fig.31);
5. Gently pull the oven door off its site (fig. 31);
6. Place it on a steady plan.
Clean the oven door glass with warm water and a softh
cloth only.
Once the cleaning is carried out, refit the oven door,
following the procedure in reverse.
