30
Fig. 1
Fig. 2
FO 0204
Hob Burner Control Knobs
The hob burners control knobs are situated on
the front panel (Fig. 1). The symbols on the
knobs mean that :
there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the Burners
For easier lighting, proceed before
putting a pan on the pan support.
Push in the relevant knob and turn it
anticlockwise to "maximum position".
After lighting the flame, keep the knob
pushed down for about 5 seconds.
This will allow the "thermocouple"
(Fig. 2, lett. D) to be heated and the
safety device to be switched off,
otherwise the gas supply would be
interrupted.
Then, check the flame is regular and
adjust it as required.
If you cannot light the flame even after
several attempts, check the "cap"
and "crown" (Fig. 2, lett. A-B) is in the
correct position.
To put the flame out, turn the knob to
the symbol " "
.
Always turn the flame down or put it
out before taking the pans off the
burner.
Gas Hob
