Zanussi ZOB 651 CG, Инструкция пользователя

Страница: 8 / 10

42
Recess dimensions
Height 58,0 / 59,1 cm
Width 56,0 cm
Depth 55,0 cm
Oven cavity dimensions
Height 32,5 cm
Width 44,0 cm
Depth 39,0 cm
Volume 55 l
Technical Data
The following instructions are meant to a qualified
technician, in order to allow him carry out the
installation in compliance with the rules in force.
The building-in and the electrical connection fo the
appliance must be carried out by a qualified and
authorized technician only.
Building In
It is important that the dimensions and materials of the
surround or cabinet into which the oven will be built are
Installation
Heating elements ratings
Bottom heating element 1000 W
Top heating element 800 W
Full Oven (Top+Bottom) (1000 + 800) 1800 W
Grill heating element 1750 W
Convection fan 30 W
Cooling fan 25 W
Oven lamp 15 W
Voltage tension (50 Hz) 230 V
Maximum power rating (230V - 50Hz) 1870 W
SOLUTION
u Check that both a cooking function and a temperature have
been selected
or
u Check the appliance is wired in properly, and the socket
switch or the switch from the mains supply to the oven are
ON.
u Turn the thermostat knob on a temperature
or
u Turn the oven function control knob on a function.
u Turn the oven function control knob on a function
or
u Buy a new oven light bulb, asking for it to your local Service
Centre and replace it by following the instruction provided in
this booklet.
u Refer to the contents of this booklet, especially to the chapter
"Using the oven".
u Leave dishes inside the oven no longer than 15-20 minutes
after the cooking is completed.
SYMPTOM
n The oven does not come on
n The oven temperature light does not come on
n The oven light does not come on
n It takes too much time to finish the dishes, or
they are cooked too fast.
n Steam and condensation settle on the food and
the oven cavity.
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Service Centre.
Something not working...
correct and will withstand a temperature increase.
A correct installation will have to ensure a proper
protection against contact with electric parts or merely
functionally isolated parts.
All the units meant to ensure protection have to be fitted
not to be taken away without using any tool.
We recommed not to install the appliance near refrigerators
or freezer, since the heat could affect the performance of
these appliances.