Zanussi ZNF21X, Руководство пользователя

Страница: 6 / 32

ZANUSSI 3
Microwave safety
Never remove the mica cover on the
ceiling of the oven interior!
This
cover stops fat and pieces of food
damaging the microwave generator.
Do not keep any inflammable object
inside the oven as it may burn if the
oven is switched on.
Do not use the oven as a pantry .
Eggs with their shells and whole
boiled eggs must not be heated in
microwave ovens because they may
explode.
Do not use the oven for frying as it is
impossible to control the temperature
of oil heated by microwaves.
To avoid being burnt , always use
oven gloves for handling dishes and
containers and touching the oven.
Do not lean or sit on the open oven
door
. This may damage the oven,
especially in the hinge zone. The door
can bear a maximum weight of 8 kg.
The turntable and the grills can bear
a maximum load of 8 kg
. To avoid
damaging the oven, do not exceed this
load
.
Cleaning:
Warning! Your microwave oven must
be cleaned regularly. All food remains
must be removed (see section on
Oven Cleaning). If the microwave oven
is not kept clean its surface may
deteriorate
and this may shorten the
oven’s working life and could even
result in a dangerous situation.
Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the oven
door glass since they can scratch the
surface, which may result in shattering
of the glass.
The door contact surfaces (the front of
the cavity and the inside part of the
doors) must be kept very clean in
order to ensure the oven functions
correctly.
Please follow the instructions
regarding cleaning in the section
“Oven Cleaning and Maintenance”.
Repairs:
Warning
– Microwaves! The outer
protection of the oven must not be
removed
. It is dangerous for anyone
not authorised by the manufacturer to
carry out any kind of repair or
maintenance work.
If the power cable is damaged it
should be substituted by the
manufacturer, authorised agents or
technicians qualified for this task in
order to avoid dangerous situations.
Furthermore, special tools are required
for this task.
Repair and maintenance work,
especially of current carrying parts,
can only be carried out by technicians
authorised by the manufacturer.